Communicate with Supplier? Supplier
Shirley Mon Ms. Shirley Mon
What can I do for you?
Contact Supplier

Shenzhen Hongdali Machinery Co.,Ltd

News

Home > News > Conveyor Belt Usage and Maintenance Instructions

Conveyor Belt Usage and Maintenance Instructions

2019-09-24

1. In transportation and storage, the Conveyor Belt should be kept clean to avoid direct sunshine or rain and snow leaching, to prevent contact with organic solvents such as acid, alkali and oil, and at least one meter away from the heat source.



2. During storage, the temperature in the warehouse should be kept between - 18 40 and the relative temperature should be kept between 50% and 80%.



3. During storage, the product should be placed in rolls and not folded. During storage, it should be flipped once a quarter.



4. Conveyor belts of different types and layers of specifications should not be joined together, and the joint should be bonded.



5. The types, structures, specifications and layers of conveyor belts should be selected reasonably according to the use conditions.



6. Conveyor Belt should not run faster than 2.5 m/s, and low speed should be used for materials with large fragmentation and abrasion and fixed unloading devices.



7. The relationship between the diameter of the driving drum and the layers of the conveyor belt, the matching of the driving drum and the reversing drum, and the requirement of the groove angle of the idler should be reasonably selected according to the design regulations of the conveyor.



8. The feeding direction should follow the running direction of the belt. In order to reduce the impact of falling material on the belt, chute should be used to reduce the falling distance of the material. The feeding section of the belt should shorten the distance between the idlers and adopt buffer idlers. In order to prevent material leakage, soft and moderate baffles should be used on the side of the belt, so as to avoid too hard baffles and scraping the conveyor belt. With surface;



9. Attention should be paid to the following matters in the use of conveyor belts:



(1) Avoid the rollers being covered by materials, resulting in poor rotation, prevent leakage from being stuck between the drum and the belt, pay attention to the lubrication of the moving part, but not oil-stained conveying tape;



(2) Avoid starting with load;



(3) When the tape deviates, measures should be taken to correct it in time.



(4) If local damage of conveyor belt is found, it should be repaired or replaced in time to avoid expansion.

Send Inquiry

Shirley Mon

Ms. Shirley Mon

Email:

shirleymon@conveyortop.com

Send Inquiry

Tel:86-755-89459585

Fax:86-755-89459686

Mobile Phone:+8613424296707Contact me with Whatsapp

Email:shirleymon@conveyortop.com

Address:No. 10 New Xinbu Road, Tongle Town, Longgang District, Shenzhen, Guangdong

Mobile Site

http://www.conveyortop.com