Shenzhen Hongdali Machinery Co.,Ltd

News

Home > News > Chain maintenance method of assembly line

Chain maintenance method of assembly line

2019-12-17

After long-term operation of the chain, the original lubricating oil may be heated and volatilized, and the Shenzhen Assembly Line may cause the chain to be unbalanced, noisy and crawling during operation. At this time, the sealing plate at the tail of the machine can be opened, and the chain can be added with butter or a little thick lubricating oil, etc.

Maintenance of head gearbox

For the first time, drain the engine oil in the gearbox in about three months, clean the gearbox with diesel or gasoline, and then add new lubricating oil to the middle of the observation window. (pay attention to the lack of lubrication every month). In the future, you can change the lubricating oil once a year. Too much lubricating oil may cause the gearbox to heat up and the motor overload may cause the motor protection switch to trip. Too little lubricating oil may cause gearbox heating, noise increase and gearbox strangulation.

Motor repair and maintenance methods

Do not water the motor, or add diesel oil and liquid organic compounds to the motor, as this may cause damage to the insulation of the motor and cause failure. The maintenance method of the governor head is the same as that of the motor. Check the motor maintenance and repair in the electrician's manual.

1. Plate chain assembly line Shenzhen assembly line

Features: the load-bearing products are relatively heavy and run synchronously with the production line, which can realize the product climbing; the production rhythm is not very fast; the chain plate surface is used as the load-bearing, which can realize the stable transportation of products.

2. Conveyor line

Features: the products carried by the assembly line in Shenzhen have a wide range of types, with few restrictions; they can be used together with the stopper to realize the continuous, rhythmic operation and accumulation function of the products; they can realize the offline repair or detection of the products without affecting the operation of the whole flow line by adopting the jacking translation device.

3. Belt assembly line

Features: the load-bearing products are relatively light, with less shape restrictions; the synchronous operation with the production line can realize the climbing and turning of the products; the belt as the carrier and transportation can realize the stable transportation of the products, with low noise; the light materials or products can be transported for a long distance.

4. Double Speed Chain Conveyor line

Features: double speed chain conveyor line adopts double speed chain traction, tooling plate can be freely transmitted, stopper positioning is adopted to make workpiece move or stop freely, workpiece can be automatically jacked up at both ends, and traverse transition. It can also be equipped with rotation, special machine, testing equipment, manipulator, etc.

Send Inquiry

Shirley Mon

Ms. Shirley Mon

Email:

Send Inquiry

Tel:86-755-89459585

Fax:86-755-89459686

Mobile Phone:+8613424296707Contact me with Whatsapp

Email:

Address:No. 10 New Xinbu Road, Tongle Town, Longgang District, Shenzhen, Guangdong

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send