Shenzhen Hongdali Machinery Co.,Ltd

Home> Industry Information> How should manufacturers choose the right assembly line for their company?

How should manufacturers choose the right assembly line for their company?

November 06, 2019

As a manufacturer, a good Assembly Line equipment is related to the efficiency of production. When purchasing assembly line equipment, we should pay attention to whether the form of assembly line meets the requirements of production. When purchasing assembly line equipment, we should pay attention to the function and function of each part of assembly line. Such assembly line equipment is the real need of the enterprise.



When purchasing assembly line, you should know the form of assembly line:

1. Classification by function:

① production line

② conveying line



2. Conveying mode:

① plane straight line transmission pipeline

② transmission line of plane turning at various angles

③ ramp up assembly line

④ ramp down flow line



Function of production line

Pipeline design is a method that divides the combinational logic systematically, inserts registers between each part (level), and stores the intermediate data temporarily.

The goal is to increase data throughput (processing speed). The pipeline shortens the path length that the given signal must pass in a clock cycle, so as to improve the clock frequency. For example, a 2-level combinational logic assumes that each level of delay is the same as TPD.



1. The total delay without pipeline is 2tpd, which can be completed in one clock cycle, but the clock cycle is limited to 2tpd;



2. Pipeline: after each level is added with register (delay is TCO), the delay of single level is TPD + TCO, and each level consumes one clock cycle. The pipeline needs two clock cycles to get the first calculation result, which is called the first delay, which requires 2 * (TPD + TCO). However, when performing repeated operations, as long as one clock cycle to get the final calculation result, it is called throughput delay (TPD + TCO )As long as TCO is less than TPD, the pipeline speed can be improved. Corollary: increasing the pipeline length can save more delay. The longer the pipeline is, the larger the first delay is. If the pipeline starts repeatedly, the speed will be lost.

The above is the How should manufacturers choose the right assembly line for their company? we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> How should manufacturers choose the right assembly line for their company?

Send Inquiry

Shirley Mon

Ms. Shirley Mon

Email:

Send Inquiry

Tel:86-755-89459585

Fax:86-755-89459686

Mobile Phone:+8613424296707Contact me with Whatsapp

Email:

Address:No. 10 New Xinbu Road, Tongle Town, Longgang District, Shenzhen, Guangdong

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send