Conveyor as a large-scale working device, such as this kind of automatic conveying equipment in operation must pay attention to safe operation. Only by standardizing operation can accidents be avoided. The
Conveyor Accessories shall be operated in accordance with the following 6 safety operation specifications.
I. The accessories of the
Belt Conveyor shall be placed on a tough base; the wheels shall be wedged symmetrically. In parallel production of multiple machines, more than 1 M channel shall be reserved between them. There should be no accumulation of obstructions near the transporter.
II. The belt tightness shall be adjusted, the belt buckle shall be stable, the transmission parts such as bearings, gears and chains shall be excellent, the idler and protection assembly shall be complete, the electrical shield shall be connected to zero or ground well, and the width of the belt and the drum shall be the same.
3. No load operation shall be carried out first, and the average loading can only be carried out after abnormal operation. Do not load before starting.
IV. when feeding, reply to the middle of the
Conveyor Belt and lower the height, and reduce the impact of blanking on the conveyor belt and idler. The charge should be kept average.
V. during the production, the operation environment of the machine shall be inspected at any time. When the invention is delivered with signs of deterioration or deviation, the machine shall be stopped for mediation.
Vi. during production, no one is allowed to pass through the conveyor belt or from below. When the conveyor belt slips, it is forbidden to pull it by hand. It is forbidden to carry out liquidation or inspection during operation.
http://www.conveyortop.com
